Behringer B-CONTROL FADER BCF2000 Quick Start Manual page 6

BCF2000 Quick Start Guide
Once you have completed the upgrade to V1.07, you are now at the right stage to
transfer preset templates to your BCF2000.
Note : your BCF2000 was shipped with a number of pre-configured templates. You can
download sys-ex files for all of these and more from :
http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG
We hope that you can appreciate that there are so many commercial MIDI-based audio
software packages on the market that it is impossible for us to offer a preset template
for every single one. We have done our best to provide templates for the most popular
current packages, but if you do not find a template for your particular host software,
please do not be disheartened. You may find that another user has already created a
suitable template and posted it as a sys-ex file on the Usenet (see links at end of this
document). You can also use the "LEARN" function to configure a blank preset in
exactly the way you want it to be (see "getting configured (ii)... below) or the "EDIT"
function to fine-tune a pre-set template. Refer to the BCF2000 instruction manual and
the documentation for your host software.
Note : If you are using Cubase
need to download or transfer any presets. From V1.06 onwards, the BCF2000 can be
started in the appropriate emulation mode – this requires no further adjustment. Refer
also to attachment #03 Firmware_V1.07_readme.pdf
Note : The preset templates are sys-ex files. Transfer these into the BCF2000 using a
standard MIDI utility (e.g. MIDI-OX or SendSX) or a MIDI sequencer. The
upgrade utility cannot be used for transferring single preset templates.
Note : Before transfering sys-ex files, ensure that the BCF2000 is in bC mode and also not in
the "global edit" menu.
For further information please visit
® ®
SX, Nuendo , Logic
www.behringer.com
® ®
, Sonar , or ProTools
BEHRINGER Spezielle Studiotechnik GmbH
Page 6
®
, then there is no
B
EHRINGER