OS-X will load its own generic USB/MIDI driver when the BCF2000 is connected via USB. ® must Note : Windows 2000 users install the driver v1.1.1.0. To install the EHRINGER driver, please use our driver set-up utility program (BCSetup.exe). EHRINGER For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 1...
Page 2
USB connection to the motherboard for the installation. You can repeat the installation for each USB port which you are likely to use. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 2...
BCR2000. The most convenient way is to use multiple USB ports – if your host system allows this. Note : when using multiple USB ports, the port configuration for all devices should be U-1. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 3...
Page 4
Note : Cascading via MIDI is only possible in b_C mode. Note : Parameter feedback is not supported if three or more units connected via MIDI. Alternatively, you may use a MIDI splitter / hub. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 4...
Note : For USB systems - you may upgrade via USB or MIDI, but ensure that the correct port is selected in the BCF2000 (either U-1 or S-1). MIDI is the more reliable option (S-1). Note : This procedure will not overwrite the factory presets. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 5...
Page 6
Note : Before transfering sys-ex files, ensure that the BCF2000 is in bC mode and also not in the “global edit” menu. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 6...
Page 7
Where applicable, these software adaption files are included in the .zip package with the relevant BCF2000 template. Download from : http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG Refer to the appropriate read-me file which was downloaded with the template for more details. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 7...
BCF2000 in the appropriate emulation mode. In this case you should select the control surface which is being emulated, and not the BCF2000 in bC-mode. For further information please visit www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH Page 8...
Disclaimer : We assume no liability for the contents of third-party websites. BEHRINGER is not liable for any damage to your software and/or hardware that may result from visiting third-party websites. Neither are we liable for the availability...