Using The Speaker Bar; Changing Speaker Bar Settings - Gateway FPD2475W User Manual

Using the speaker bar

To turn on the speaker bar:
•
To use headphones:
•

Changing speaker bar settings

You can change the following settings on the optional speaker bar:
•
•
•
•
•
•
To adjust the volume:
1
2
3
To adjust the treble and bass:
1
2
To change the audio input source:
•
To enable 3D sound:
•
www.gateway.com
Press the power button on the speaker bar. The speaker bar turns on, and the button LEDs
turn on.
Tip
You can connect a pair of headphones to each headphone jack.
Plug headphones into either of the speaker bar's headphone jacks. The speaker bar's volume
is muted, and sound is played through the connected headphones. You can connect
headphones to each headphone jack, and sound will play out of both sets.
Volume
Treble
Bass
Mute
Input
3D sound
On the speaker bar, press MODE until VOLUME is selected (VOLUME is the default selection).
The current mode is displayed under the MODE button.
Press + or – on the adjustment slider to adjust the sound in single-step increments, or slide
your finger along the slider for larger increments. Slide to the right to increase volume, slide
to the left to decrease volume. Press and hold + or – to autorepeat.
To mute or unmute the sound, press the mute button.
On the speaker bar, press MODE until TREB or BASS is selected.
Press + or - on the adjustment slider to adjust the sound in single-step increments, or slide
your finger along the slider for larger increments. Slide to the right to increase, slide to the
left to decrease.
On the speaker bar, press INPUT to select PC (PC is the default selection), AUX, or both.
On the speaker bar, press 3D. The speaker bar plays Surround Sound-like audio.
23