Gateway FPD 2020 User Manual page 8

Using Your FPD 2020 Monitor
4
If your computer supports analog video (blue video connector), connect
the analog video cable to the blue analog connector underneath the
bottom of the screen.
- OR -
If your computer supports digital video (white video connector), connect
the digital video cable to the white DVI connector underneath the bottom
of the screen.
Important
5
Return the monitor to its upright position.
6
Make sure that your computer is turned off.
4
Make sure that you only connect one video cable to the
monitor and computer. The only way to use both
connections it to share the monitor between two
computers. Use the SOURCE button to change between
computers. For more information, see "Adjusting monitor
settings" on page 9.
www.gateway.com