Gateway FPD 2020 User Manual page 12

Using Your FPD 2020 Monitor
3
After your computer is running, the power LED on the monitor should be
green. Allow about 10 seconds for the display image to appear. If the power
LED is not green or you do not see a display image, check the connections.
For more troubleshooting information, see "Troubleshooting" on page 20.
4
Adjust the tilt of the monitor for the best viewing angle.
5
After you see the Windows desktop, press the
adjust your display image to the ideal settings.
6
Use the on-screen display (OSD) to adjust other monitor settings. For more
information, see "Adjusting monitor settings" on page 9.
Important
8
When adjusting the monitor settings, always press the
AUTO button before entering the OSD. This will
automatically adjust the display image to the ideal settings
for the current screen resolution.
The best screen resolution is 1600 × 1200.
www.gateway.com
button to automatically
AUTO