Recording; Record - Play Back; Remote Control Using A Computer (Rs232) - AOR AR2700 Operating Manual

selected. The selection of RECORD On and Off is made using the [DIAL] with
legends "oFF" and "on" confirming selection. To accept the displayed selection
press [ENT]. The set will quickly display all LCD segments then power On as
normal. The option will now have been added or removed from the keypad
operation as appropriate.
Note: When in the setup menu, the UP / DOWN keys toggle between the
RECORD and DESCRAMBLE option setup routines.

13-2 Recording

To make a recording, tune the receiver to
an active frequency and key the sequence
[2ndF] [4] with the [4] key held for more
than 1.5 seconds, the legend "REC" will
be displayed on the LCD and the current
displayed frequency will be recorded for
20 seconds (presuming that the optional
record chip has been fitted).
The signal meter acts as a "progress meter" to illustrate how much record and
play back time has elapsed.
The record facility may be used in MANUAL mode, or even when scanning or
searching.
13-3 Play back
To replay a previously recorded
transmission, key the sequence [2ndF]
[4]. The legend "PLAY" will be displayed
on the LCD and the 20 second digital
recording will be replayed (presuming that
the optional record chip has been fitted).
If the optional chip has not been fitted then
white noise will be heard.
The signal meter acts as a "progress meter" to illustrate how much record and
play back time has elapsed.
(14) Remote control using a computer (RS232C)
The AR2700 is capable of remote control using a computer such as
an IBM compatible and control software. An adaptor (IF-ADP) and
small external interface (CU8232) and lead are required and
available as options.
Further information will be provided with the optional
CU8232 interface unit.