Setting Up the iP44 Using the Alarm Charging your iPhone/Pod Listening to iPhone/iPod Listening to FM Radio Sleep Operation Using the iP44 in Other Countries Dimmer Operation A Consumer Guide to Product Safety Trouble Shooting Warranty Information Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
Page 3
FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
Select the dock insert for your Attach AC adaptor cable to jack on Insert iPhone or iPod into dock with back of the iP44 and plug the other iPhone/iPod model from the table proper insert (iPhone/iPod must not end into a wall socket.
Installing/Replacing the Clock Backup Battery The iP44 requires a CR2032 lithium battery (included) to provide backup power to the clock in the event of a temporary power interruption. The CR2032 backup battery was packed in the same poly bag with this instruction manual.
Time Sync from iPhone/iPod he iP44 Time Sync feature allows you to quickly sync the time on the iP44 to the time on your iPhone or recent model iPod (iPod Touch, iPod Nano and iPod Classic; older iPod models such as iPod mini do not support this feature).
Using the Pillow Shaker The iP44 comes with a pillow shaker that plugs into the aux wake-to (pillow shaker) jack on the back of the unit. You can wake to any alarm mode with or without the shaker. For example, if your alarm source is set to iPod and the pillow shaker is connected and on, the iPod will play AND the pillow shaker will vibrate at the set alarm time.
To skip to different music tracks or to perform high speed music search within a track, you may press the << or >> buttons on the top panel of the iP44. These controls have the same function as the l<< or >>l buttons on your iPod click wheel or your iPhone display.
1. Make sure the iP44 is OFF (not playing in any mode). Press and hold the Radio Button for about 5 seconds until the radio icon flashes in the lower part of the display. Press the << or >> Button to select your region.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use.
Please refer to your iPhone/iPod manual for detail. Using 1 st or 2 nd generation iPod, iPod iP44 cannot control those iPod models or other devices. shuffle or other devices. iPhone/iPod didn’t iPhone/iPod is not docked properly...
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, packing, return UPS/postage, and...