Trouble Shooting Warranty NOTE : The iP47 is designed for use with Bluetooth wireless devices compatible with the HFP, HSP, A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth device’s user manual or technical support to determine if your Bluetooth device supports these profiles.
Page 3
Consult the dealer or an experienced radio/TV technician for help. Thank you for purchasing the iP47. Designed specifically to play music through Bluetooth from your mobile phone or computer (through Bluetooth or line-in cord). This system provides high quality audio performance that brings out the best in your music and lets you wake or sleep to it.
2: Pair Your Bluetooth-enabled Phone With The iP47 a) Select Bluetooth/discover mode on your phone (see your user manual) b) Press and hold the Play/Pause button on the iP47. The unit will enter Auto-pairing mode and begin searching for a device to pair with, indicated by flashing Bluetooth and pairing icons.
Insert an iPhone or iPod into the dock with proper insert (iPhone/iPod must not be in a skin or case). The iPhone/iPod will charge while docked. Press the Play/Pause Button on the iP47 play your iPhone/iPod. iPod Touch Insert 14 iPod Touch...
Press the Button on the iP47 or on the remote control at any time to turn the iP47 On or Off. Note that a docked iPhone or iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged Setting Up the iP47 The iP47 clock is preset to U.S.
Sure Alarm The iP47 has a sure alarm feature so the buzzer alarm still sound in the event of a power failure, if backup battery is installed. If your iPhone/iPod or Bluetooth device has no sound for 20 seconds or is not present, the iP47 will switch to buzzer alarm automatically.
If the iP47 is already on, press the Mode Button until “iPod” appears on the lower part of the display, indicating the iP47 is in iPod mode. If your iPhone or iPod Touch is in video mode, you may see the “locked”...
1. Plug one end of an audio patch cord (available at http//:www.ihomeaudio.com) into the headphone or line-out jack on your device and the other end of the patch cord into the iP47 Line in Jack, located on the back of the unit.
3. To end the call, press the Dial/Re-dial Dialing: 1. Once the iP47 is paired to a Bluetooth mobile phone, you can use the integrated keypad or the remote control to enter a phone number. 2. Input a phone number in normal operation mode (you do not need to be in Bluetooth mode) then press the Press the Clear Button to cancel the last digit entered or press and hold Clear to cancel all digits.
Remote Control - Press POWER / alm reset to turn unit on or off and reset alarm to come on the next day. - Press MODE to select iPod, Bluetooth, FM1, FM2, AM or Line in mode. - Press PLAY/PAUSE to play iPhone/iPod/Bluetooth and to pause and to resume play. - Press VOLUME BUTTONS to adjust volume level.
The iP47 uses 3 x AA backup battery system to provide backup alarm operation and clock settings in the event of a power failure. If the Backup Battery has been installed and a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained.
When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference. Take special note, and adhere to all warnings on the unit and in the instruction and service manual.
Press the Power button on the iP47 While you need the A2DP and AVRCP Bluetooth profiles to stream music to the iP47, you can still use the handsfree speaker phone functionality Make sure your phone supports the A2DP and AVRCP Bluetooth profiles before linking/pairing.
Page 16
Bluetooth music Device is not charged Device does not support A2DP and AVRCP Bluetooth profiles Calls don't Volume on iP47 is too low sound clear Poor connection or cell phone reception Dialing out error Some phones do not support dialing out...
Page 17
Si el tomacorriente tuviera un selector de encendido, colóquelo en esa posición. Oprima el botón “Power” (encendido) del iP47. Para escuchar música a través del iP47 se requiere tecnología Bluetooth A2DP o AVRCP, si bien puede seguir utilizando el altoparlante del teléfono celular.
Page 18
El aparato no soporta tecnología Bluetooth A2DP y AVRCP. Las llamadas El volumen del iP47 está muy bajo. no se escuchan Hay mala recepción celular en ese sector. con claridad. Mensaje de error al Algunos teléfonos no pueden discar discar llamados mientras está...
Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.
Page 20
5) Choose “add a new Bluetooth device” on your device. It will start to search. If the pairing attempt fails or times out, press and hold the Play button on the iP47 for 4 seconds to restart the process, and repeat “add a new Bluetooth device” on your Bluetooth device.