Insignia NS-37L760A12 User Manual page 17

Insignia 37" LCD, 60Hz 1080p
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3 Connect an A/V cable (not included) to the
Y-VIDEO and L/R (audio in) jacks on the side of
your TV and to the composite video and audio
out jacks on the cable or satellite box.
Cables are often color-coded to
match color-coded jacks.
Note: The yellow connector on
the AV cable plugs into the green
Y-VIDEO jack.
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 21.
Cable or satellite box
A/V cable
Side of TV
www.insigniaproducts.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a coaxial cable (not included) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
Back of TV
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5 Go through the Setup Wizard on page 21.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Coaxial cable
13