Dynamic Ip Address Notification Tab - Notifying The Ip Address - Sony SNC-M1 User Manual

When the Type menu is set to Infrastructure mode, the
WEP key should be the same as that of the access point.
When the Type menu is set to Ad hoc mode, the WEP
key should be the same as that of the communication
client.
Notes
• To activate the wireless connection, unplug the
network cable and turn on the camera.
• The wireless connection and the wired connection
using the network cable cannot be used
simultaneously.
Dynamic IP address notification
Tab — Notifying the IP Address
When the DHCP setting is set to On on the Network tab,
you can send notification of the completion of the
network settings using the SMTP or HTTP protocol.
e-mail (SMTP) notification
Select On to send an E-mail when the DHCP setting is
completed.
SMTP server name
Type the name or IP address of the SMTP server you
want to use for sending an E-mail, up to 64 characters.
Authentication
Select the authentication required when you send an e-
Mail.
None: Select when no authentication is necessary when
an e-mail is sent.
SMTP authentication: Select when authentication is
necessary when an e-mail is sent.
POP before SMTP: Select when POP before SMTP is
necessary when an e-mail is sent.
26
Configuring the Network — Network setting Menu
POP server name
It is necessary when the POP before SMTP is selected
in Authentication.
Type the POP (receiving mail) server name up to 64
characters. Or type the IP address of the POP server.
This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP
user account.
User name, Password
Type the user name and Password of the user who has
the mail account. This setting is necessary when the
SMTP server which sends e-mails performs
authentication.
Recipient e-Mail address
Type the recipient e-Mail address up to 64 characters.
You can specify only one recipient e-Mail address.
Administrator e-Mail address
Type the e-Mail address of the camera administrator, up
to 64 characters. This is used as the reply address or the
address for a system mail from the mail server.
Subject
Type the subject/title of the e-Mail up to 64 characters.
Message
Type the text of the e-Mail up to 384 characters. You can
describe the information of the acquired IP address, etc.
using the special tags mentioned below.
HTTP notification
Select On to output a command to the HTTP server
when the DHCP setting is completed. Using this
function, you can configure a useful system, for
example, to view the access log stored in the HTTP
server or start an external CGI program.
URL
Specify the URL to send HTTP commands, up to 256
characters. The URL is normally composed as follows:
http://ip_address[:port]/path?parameter
ip_address: Type the IP address or host name of the host
to which you want to connect.
:port: Specify the port number to which you want to
connect. If you want to use the well-known port
number 80, you do not need to input this value.
path: Type the command name.
parameter: Type the command parameter if necessary.
You can use the special tags mentioned below for the
parameters.