Using The Control - Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA-0000 User Manual

oper ncj
s rnsuncj
reffger or
USING THE CONTROL PANEL
: :::: Se ect Ra_m} ..........................................................
The CoolSelect button lets you set the Cool
Select Room on the bottom right of your
refrigerator to one of four settings: Freezer, Soft
Freezing, Chill, or Cool,
Press the CoolSelect button for three seconds to
activate the Cool Select Room function, and then
select one of the four settings,
Select Freezer to set the Cool Select
Freezer
®
Room to the same temperature as
the freezer.
* Use this setting to keep frozen
food fresh,
e
Soft
Freezing
Chill *
e
Cool
Select Soft Freezing to set the
temperature in the Cool Select
Room to 23 °F (-5 °C) .This
feature helps keep meat and fish
fresh longer,
Select Chill to set the temperature
of the Cool Select Room to 30 °F
(-1 °C),
Select Cool to set the temperature
of the Cool Select Room to 41 °F
(5 °C). You can keep water, juice,
soft drinks, beer, etc, cold,
Touch this button to set the freezer
to your desired temperature,
You can set the temperature between
-8 °F and 5 °F (between -23 °C and
-15 °C).
Touch and hold this button for
[_ 3 seconds to decrease the time
needed to freeze products in the
Freezer. This can be helpful if you
need to quickly freeze easily spoiled
items or if the temperature in the
freezer has warmed dramatically (For
example, if the door was left open).
ii
This button serves two purposes:
1) To turn the door open alarm on
and off
if the door alarm is set to On, an
alarm beeps if any refrigerator
door is left open for more than two
minutes.
The beeping stops when you close
the door. The door alarm function
is pre-set to On in the factory.
You can turn it off by touching and
then releasing this button.
E_.J)) You can turn it back on in the
same fashion. The icon lights up
when the function is on.
When the Door Alarm function
is on and the alarm sound is
triggered, the Door Alarm icon will
blink while the alarm sounds.
2) To reset the water filter life
indicator.
After you replace the water filter,
touch and hold this button for 3
seconds to reset the water filter life
indicator.
16 operating