Advertisement
Connected
to a Ioca_ network_
but not to the
_ntenset
Make sure that the Internet
LAN cable is connected
to the router's
external
LAN port.
2,
Check the DNS settings
under JP Settings.
3,
If the problem
persists,
contact
your Internet
Service
Provider.
Network
setup
complete_
but unable
to connect
to the
_ntenset
If the problem
persists,
contact
your
Internet
Service
Provider,
WireEess Network
2_2@£:3
> Menu_
> Network
> Network
Settings
The dispIayed
image may differ
depending
on the modet,
Automatic
Wireless
Network
Setup
Connect
the TV to the Internet
via a wireless
router, Check the wireless
router's
SSID and security
key settings
before attempting
to connect.
The security
key can be found
on the wireless
router's
configuration
screen.
Setting
Network
type to Wireless
automatically
displays
a list of available
wireless
networks.
o
o
o
Select the network
(SSID) you wish to connect
to. If the desired
wireless
router doesn't
appear
in
the list, select Add Network
and enter the network's
SSID manually.
Enter the security
key and select Done. If the selected
network
is not security-enabled,
the TV will
attempt
a connection
right away.
The TV attempts
to connect
to the network.
A confirmation
message
is then shown
once a
connection
is established.
Select OK to proceed.
If the attempt
fails, try again or connect
manually.
Advertisement
