Start Your Installation - Planar PT1700M(U) User Manual

Start your Installation

• Remove the Back Cover • Remove the Back Cover
• Remove the Back Cover • Remove the Back Cover • Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the
LCD so that you can connect the cables in "Connector Ports B. "
1. To remove the back cover, follow the arrows in Figure A and press with both
your thumbs. The cover should be removed by pressing firmly.
2. Follow the instruction on P.12 (Figure 11.1) to connect the cables in
"Connector Ports B. "
3. Fix the cover back to the LCD. You may also keep the cables in order with the
included cable organizer.
! Note! Note!
Note! Note! Note!
You can place the LCD flat horizontally to make it easier to connect the
cables. Please make sure that you place it on an even surface lest the LCD
should be damaged by scratches or collision.
PT1700M(U) and PT1701M(U) User's Guide (
020-0410-00 A)
11