Table of Contents
Advertisement
T55D.book Page 23 Monday, August 31, 1998 5:46 PM
2.
Squeeze the sides of the hinge cover (b) and pull it and the cable cover
(a) off.
d
3.
Gently lift the stand cover (c) along the top and then slide it backwards
and off the stand.
4.
Remove the signal cable and the power cord from the monitor by
disconnecting the corresponding adapters. Carefully cut the plastic tie to
free the power cord and remove the screw holding the power cord
clamp.
5.
Lay the monitor facedown on a cushion and remove the six screws
holding the hinge mechanism on the monitor. Lift off the hinge and base
assembly.
6.
Insert your finger in the slot of one of the two VESA caps (d) and pull the
cap off. Repeat the procedure on the other VESA cap.
a
b
d
c
23
Advertisement
Table of Contents
