Other Required Materials; Special Tools Required; License Requirements - Garmin Apollo SL40 Installation Manual

Introduction
O R
THER EQUIRED
The SL40 is intended for use with standard aviation accessories. The following items are
required for the installation:
x comm antenna with cables
x a microphone
x a speaker or headphone
These items may be installed dedicated to the SL40 comm or by connections to an audio
panel.
S T
PECIAL OOLS
Crimp Tool
A crimp tool meeting MIL specification M22520/1-01 and a positioner/locater are required to
ensure consistent, reliable crimp contact connections for the rear d-sub connectors. These tools
are available from:
For pin p/n 245-0022
Astro Tool Corp.
21615 SW TV Highway
Beaverton, OR 97006
Crimp tool:
Positioner:
For pin p/n 245-0027
ITT Cannon
1851 E. Deere Ave.
Santa Ana, CA 92705-6500
Insertion tool:
Regular duty Crimp tool:
Regular duty Locator tool:
Heavy duty Crimp tool:
Heavy duty Locator tool:
L R
ICENSE EQUIREMENTS
An aircraft radio station license is required for operation of the transmitter once installed in
the aircraft. An application must be submitted on FCC Form 404, which may be obtained
from the FCC in Washington, DC, or any of its field offices. Procedures for applications are in
CFR 47, Part 87, Aviation Services, Subpart B, Applications and Licenses.
4
M
ATERIALS
R
EQUIRED
ITT part # 274-7006-000 (Desc. CIET-20HD)
ITT part #995-0001-585 (Desc. M22520/1-01)
ITT part #995-0001-244 (Desc. TH25)
ITT part #995-0001-584 (Desc. M22520/2-01)
ITT part #995-0001-604 (Desc. M22520/2-08)
Phone (503) 642-9853
Fax (503) 591-7766
Astro Tool part #615708
Astro Tool part #616356
Phone (714) 261-5300
Fax (714) 575-8324
Apollo SL40 Installation Manual