Signalling; Dtmf Signalling; 2-Tone Signalling - Kenwood TK-2140 Instruction Manual

SIGNALLING

DTMF S
IGNALLING
Your dealer can program a group with a DTMF signalling
code. When you receive a call with a code that matches
yours, the signalling indicator will flash and a tone will
sound. Squelch opens and you will hear the call.
Squelch will close when you receive a call with a code
that matches your signalling reset code.
When making a call on a group programmed with a
DTMF signalling code, the signalling indicator will light
and the squelch will open.
2-T S
ONE IGNALLING
2-Tone Signalling is either activated or deactivated by
your dealer.
2-Tone Signalling only opens the squelch when the
transceiver receives two tones corresponding to those
set up in the transceiver. When the squelch opens, you
will be able to hear the caller without any further action.
After a correct 2-Tone signal is received and the squelch
opens, pressing the key programmed as Monitor will
cancel the connection.
If your dealer programmed Transpond for 2-Tone
Signalling, your transceiver will automatically send an
acknowledgment signal to the station that called you
with the correct 2-Tone signal. Transpond does not
function when you are called as a Group call.
If your dealer programmed Call Alert for 2-Tone
Signalling, your transceiver will emit a beep when the
correct 2-Tone signal is received.
21