Specifications - Craftsman 25cc - Propane Curved Shaft Trimmer Powered by Lehr Operation Manual

SPECIFICATIONS

ENGINE*
ENGINE TYPE
DISPLACEMENT
CLUTCH TYPE
OPERATING R.P.M.
IDLE SPEED
IGNITION TYPE
IGNITION SWITCH
VALVE CLEARANCE
SPARK PLUG GAP
LUBRICATION
CRANKCASE OIL CAPACITY
FUEL
CARBURETOR
STARTER
MUFFLER
THROTTLE
DRIVE SHAFT AND HOUSING
DRIVE SHAFT HOUSING
THROTTLE CONTROL
APPROXIMATE UNIT WEIGHT
CUTTING MECHANISM
LINE SPOOL DIAMETER
TRIMMING LINE DIAMETER
CUTTING PATH DIAMETER
ALL SPECIFICATIONS ARE BASED ON THE LASTEST PRODUCT INFORMATION AT THE TIME OF PRINTING.
WE RESERVE THE RIGHT TO MAKE CHANGES AT ANY TIME WITHOUT NOTICE.
20
LEHR |
ALL RIGHTS RESERVES 2008-2009
AIR COOLED 4-CYCLE
PUSH ON/OFF SWITCH
0.076-0.152MM (0.003-0.006 IN)
PROPANE 16.4
CHOKE -LESS , ALL-POSITION
BAFFLED WITH GUARD
SAFETY LOCK WITH MANUAL SPRING RETURN
FINGER -TIP TRIGGER
BUMP FEED CUTTING HEAD
17 INCHES (431.8 MM)
25.4 CC
CENTRIFUGAL
6,800-9300 R.P.M.
3,000-3,400 R.P.M.
ELECTRONIC
0.020 INCH (0.5 MM)
SAE 10W-30 OIL
1.7 FLUID OZ. (50mL)
CANISTER
OZ
AUTO REWIND
ALUMINUM TUBE
13.1-14.9 LBS
2.4/3.4 INCHES
0.080 /0.095 INCHES