Feed Roller - Samsung ML 1710 - B/W Laser Printer Service Manual

5.12 Feed Roller

1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- Drive Ass'y(see page 5-7)
2. Remove two screws from the Guide Paper and
take it out.
Guide paper
3. Pull up the Feed Idle Bush and Feed Idle Shaft,
as shown below.
Feed Idle
Shaft
Bush
4. Remove three screws from the Feed Bracket
and take it out.
Feed Bracket
Samsung Electronics
Disassembly and Reassembly
5. Remove the Idle Gear and Feed Gear2.
Feed Gear2
Idle Gear
6. Remove the Feed Gear 1 Ass'y, as shown
below.
Feed Gear1
Ass'y
7. Remove the Feed Roller and Feed Roller 1, as
shown below.
Feed Roller
Feed Roller1
Service Manual
5-11