Samsung ML 1710 - B/W Laser Printer Service Manual page 43

Disassembly and Reassembly
5.3.2 Fuser(Q-PID Type)
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
2. Unplug two connectors(Block) from the boards,
then remove four screws.
3. Remove two screws and take the Thermostat
out of the Fuser.
Service Manual
5-4
Fuser Ass'y
Thermostat
4. Remove two screws.
5. Remove one screw and take the Idle Gear out.
Idle Gear
Samsung Electronics