Advertisement
Quick Links
FRIDGE
Contents
Positioning and connection
Reversible doors
Overall view
Starting the appliance
Chiller system
Using the refrigerator to its full potential
Food hygiene
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
General safety
Disposal
Respecting and conserving the environment
Advertisement
Related Manuals for Indesit SAAN 300
Summary of Contents for Indesit SAAN 300
- Page 1 FRIDGE Contents Positioning and connection Reversible doors Overall view Starting the appliance Chiller system Using the refrigerator to its full potential Food hygiene Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance Replacing the light bulb General safety Disposal Respecting and conserving the environment...
-
Page 2: This Appliance Must Be Earthed
Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. - Page 3 Fitting a new plug IMPORTANT WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow - Earth Blue - Neutral Brown - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: Connect Green and Yellow wire to terminal marked...
- Page 4 Stability bracket (Models SAN400 and SAN400S only): To prevent the fridge from tilting forwards, it must be held in place with the stability bracket supplied. This is the responsibility of the customer. Fixed to the floor or wall at the rear of the fridge, the stability bracket hooks onto the compressor mounting plate holding the fridge secure.
- Page 5 The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. control ( see Maintenance ) SHELVES• Levelling • Varies by number and/or position. Available only on certain models.
- Page 6 : with or without grill. Due to the special guides the shelves are removable and the height is adjustable ( see diagram ), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. bin: to store food (such as cold meats) for a long time and also prevent odours from lingering in the refrigerator.
- Page 7 ( see Installation ). Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. 1. Insert the plug into the socket and ensure that the internal light illuminates. 2. Turn the TEMPERATURE ADJUSTMENT knob to an average value.
- Page 8 • Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature ( see Description ). • Place only cold or lukewarm foods in the compartment, not hot foods ( see Precautions and tips ). • Remember that cooked foods do not last longer than raw foods.
- Page 9 During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact. • The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap.
- Page 10 The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;...
- Page 11 If the appliance does not work, before calling for Assistance ( see Assistance ), check for a solution from the following list. • The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. •...
- Page 12 • Check if the malfunction can be solved on your own ( see Troubleshooting ). • If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre • type of malfunction •...