Date And Time Function; Error Message - Olympus SZ-15 Instruction Manual

Date and time function

Date and time function
"Date and time settings return to the default
setting".
● If the batteries are removed and left out of the
camera for about 1 days
settings return to the default setting, and must
be reset.
*1
The time until the date and time settings
return to the default setting varies depending
on how long the batteries have been loaded.
"Turning on the camera and making the initial
settings" (p. 7)
Miscellaneous Miscellaneous
"The camera makes a noise when taking
pictures".
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to
shoot.
*1 , the date and time

Error message

● When one of the messages below is displayed on
the monitor, check the corrective action.
Error message
Card problem
Insert a new card.
Card Error
Card problem
The card write-protect switch is
set to the "LOCK" side. Release
Write Protect
the switch.
Internal memory problem
• Insert a card.
Memory Full • Erase unwanted images.
Card problem
• Replace the card.
• Erase unwanted images.
Card Full
Card problem
Card Setup
Use FG to select [Format],
and press the A button. Next,
Power Off
Format
use FG to select [Yes], and
press the A button.
Internal memory problem
Memory Setup
Use FG to select [Memory
Format], and press the
Power Off Power Off
A button. Next, use FG to
Memory Format
select [Yes], and press the A
button.
*1 Before erasing important images, download them
to a computer.
*2 All data will be erased.
Corrective action
*1
*1
*2
*2
EN
53