S Button/Dial/Lever; T Release/J - Olympus E-P5 Instruction Manual

R AF/MF
Option
AF Illuminat.
I Face Priority

S Button/Dial/Lever

Option
Button Function
Dial Function
Dial Direction
Mode Dial
Function
L Lever Function

T Release/j

Option
Rls Priority S
Rls Priority C
j L fps
j H fps
j + IS Off
Half Way Rls
With IS
Lens I.S. Priority
Release Lag-Time
* This will shorten the battery life. Also make sure that the camera is not subject to sharp
impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If
this happens, turn the power off and on again.
Select [Off] to disable the AF illuminator.
Select the face priority AF mode. This is the same as the
live control setting.
Choose the function assigned to the selected button.
[;Function], [aFunction], [RFunction], [IFunction],
[GFunction], [nFunction], [lFunction]
You can change the functions assigned to the main dial and
sub-dial.
Choose the direction in which the dial is rotated to adjust
shutter speed or aperture.
Customize the shooting mode set by the mode dial. You can
apply saved Myset settings.
You can use the positioning of the lever to change the
function of the dials and button.
If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 59) and C-AF (P. 59) modes.
Choose the frame advance rates for [S] and [T]. Figures
are the approximate maximums.
When set to [Off], the image stablizer will turn on for
sequential shooting.
If set to [On], image stabilization operates when you press
shutter button halfway.
If [On] is selected, priority is given to the lens function
operation when using a lens with an image stabilization
function.
If [Short] is selected, the time lag between fully pressing the
shutter button and the shot being taken can be shortened.*
Description
Description
Description
R
c
MENU
g
—
41
S
c
MENU
g
85
—
—
—
86
T
c
MENU
g
—
43
—
—
—
—
4
EN 77