Table of Contents
Advertisement
Using the shooting modes
"Point-and-shoot" photography (P program mode)
In mode P, the camera automatically adjusts shutter speed and aperture in response
to subject brightness. Set the mode dial to P.
• The functions you can set with the dials depend on the position of the lever.
Lever
• The shutter speed and aperture selected by the camera are displayed.
• The shutter speed and aperture displays fl ash if the camera is unable to achieve
optimal exposure.
Warning display
example (blinking)
60"
60" F2.8
F2.8
8000
8000 F22
F22
• The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
• When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 45)
Program shift (%)
In P and ART modes, you can choose different combinations
of aperture value and shutter speed without altering exposure.
"s" appears next to the shooting mode during program shift.
To cancel program shift, turn the dial until "s" is no longer
displayed.
#
Cautions
• Program shift is not available when you are using a fl ash.
Aperture value
ISO-A
200
Shutter speed
Shooting mode
P
Sub-dial
Main dial
Status
The subject is too
dark.
The subject is too
bright.
L
N
FullHD
F
01:02:03
01:02:03
250
250 F5.6
0.0
0.0
38
38
Position of the lever
Dial
1
Exposure
k
compensation
j
Program shift
Action
• Use the fl ash.
• The metered range of the camera is
exceeded. A commercially available ND
fi lter (for adjusting the amount of light) is
required.
ISO-A
200
P
s
Program shift
2
ISO
White balance
L
N
FullHD
F
01:02:03
01:02:03
250 F5.6
250
0.0
0.0
38
38
2
EN
25
Advertisement
Table of Contents
