Usb Interface Troubleshooting - Garmin StreetPilot 2730 Owner's Manual

A
PPENDIX

USB Interface Troubleshooting

Problem/Question
How do I know my
StreetPilot is in USB
Mass Storage Mode?
My computer never
senses that the
StreetPilot is connected.
I cannot find any drives
named "GARMIN" in my
list of drives.
A message saying
"Unsafe Removal of
Device" appears when I
unplug the USB cable.
52
When your StreetPilot is in USB Mass Storage Mode, a picture of a
StreetPilot connected to a computer is shown. Also, your computer should
show a new Removable Disk Drive listed in My Computer.
1. Unplug the USB cable from your computer.
2. Load the USB drivers to your computer. See
3. Plug the USB cable into your computer. Select
Try the solution listed above.
If you have several network drives mapped on your computer, Windows may
have trouble assigning drive letters to your StreetPilot drives. Follow the
steps on page 53 to assign your drive letters.
When you are ready to disconnect your StreetPilot from your computer,
double-click the Unplug or Eject
Mass Storage Device" and click Stop. Select the StreetPilot drives and click
OK. You can disconnect your StreetPilot from your computer now.
Solution/Answer
page
USB Mass
icon in your system tray. Select "USB
21.
Storage.
StreetPilot 2730 Owner's Manual