Caring For The Quest; Cleaning The Case; Cleaning The Screen - Garmin Quest TM Owner's Manual

I > C
NTRODUCTION ARING FOR THE

Caring for the Quest

The Quest is constructed of high quality materials and does not
require user maintenance other than cleaning.

Cleaning the Case

Clean the unit's outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that may damage plastic
components.

Cleaning the Screen

Clean the screen using a soft, clean, lint-free cloth. You may use
water, isopropyl alcohol, or eyeglass cleaner if needed. To use these
cleaners, apply the liquid to the cloth and wipe the screen.
Storage
Do not store the Quest where prolonged exposure to temperature
extremes may occur (such as in the trunk of a car), as permanent
damage may result.
Avoid Theft
To avoid theft, take your Quest with you or remove it from view
when you leave your vehicle.
vi
Q
UEST
Using the Quest Responsibly
The Quest is equipped with a Safe Mode feature to improve
driver safety. When your vehicle is moving, Safe Mode disables
all functions that require significant operator attention and could
become a distraction when driving.
Read the warnings on pages iv–v to learn how to install and use
your Quest safely and responsibly.
Battery Temperature Warning
Your Quest contains an internal lithium-ion battery, which can store
more energy than standard batteries. All batteries slowly lose the
amount of energy they can hold over time. To maximize battery
life, limit the unit's prolonged exposure to excessive heat and direct
sunlight.
If Your Quest Locks Up...
On rare occasions, your Quest may freeze or lock up. In this case,
reset it by pressing the Power key and the IN key at the same time.
The unit turns off. The unit will operate normally when you turn it
on again.
Quest Owner's Manual