A Tutorial - Garmin Quest TM Owner's Manual

U O > A T
NIT VERVIEW UTORIAL

A Tutorial

This tutorial guides you through the steps for finding a restaurant
in your area and then creating a route to it. If you have never used
a Quest or a GPS unit before, try this simple task. You will see that
using your Quest is fast and easy.
Make certain the antenna is unobstructed as it looks for satellites.
For example, it cannot establish a satellite fix if your vehicle is
parked in a garage. Position the antenna so that it is parallel to
the surface of the road so that it can have the best view of the sky.
Step 1: If you have not already done so, flip up the antenna and
snap your Quest into the vehicle suction mount. Plug the cable end
of the 12-Volt adapter into your vehicle's cigarette lighter. See page
6 if you need additional instructions. Turn on the Quest. When
your Quest has established a satellite fix, it displays a "Ready to
Navigate" message.
2
Map page
Step 2: Press the FIND key. The Find Menu appears.
Step 3: Highlight the Food & Drink icon located on the Find
Menu (from Step 2) and press the OK key. The list of restaurants in
your area appears on a page similar to the one shown below.
FIND key
Rocker pad
OK key
Use the Rocker pad to
highlight the Food &
Drink icon. Then press
the OK key.
Use the Rocker pad to
highlight a restaurant.
Then press the OK key.
Quest Owner's Manual