Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Parallel Port
Serial Port
SATA Operation
Drives
Description
•
Field Enable Legacy Option ROMs
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
•
Enable UEFI Network Stack
•
Disabled
•
Enabled
•
Enabled w/PXE (Default Setting)
Allows you to define and set how the parallel
port on the docking station operates. You can
set the parallel port to:
•
Disabled
•
AT (Default Setting)
•
PS2
•
ECP
Identifies and defines the serial port settings.
You can set the serial port to:
•
Disabled
•
COM1 (Default Setting)
•
COM2
•
COM3
•
COM4
NOTE: The operating system may allocate
resources even if the setting is disabled.
Allows you to configure the internal SATA
hard-drive controller. The options are:
•
Disabled
•
ATA
•
AHCI
•
RAID On (Default Setting)
NOTE: SATA is configured to support
RAID mode.
Allows you to configure the SATA drives on
board. The options are:
•
SATA-0
•
SATA-1
59