Removing The Display Assembly - Dell Inspiron 300m Service Manual

Display Assembly

Removing the Display Assembly

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual.
NOTICE: Disconnect the computer and any attached devices from electrical outlets.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Before You Begin" before performing the following procedure.
1. Remove the battery.
2. Remove the keyboard.
3. Turn the computer over, and remove the two M3 x 5-mm screws from the bottom of the computer.
1 M3 x 5-mm screws (2)
4. Turn the computer over and open the display 180 degrees.