Table of Contents
Advertisement
Getting Started
4. Place the suction cup on the
windshield.
5. Flip the lever back, toward the
windshield.
6. Fit the bottom of your nüvi into the
cradle.
7. Tilt the nüvi back until it snaps into
place.
8. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle. Your unit should turn on
automatically if it is plugged in and
your vehicle is running.
To power outlet
in vehicle
To power connector
on nüvi cradle
9. Secure the antenna to the windshield
using the suction cups.
Antenna (suction
cups not shown)
Step 5: Configure the
nüvi
To turn on your nüvi, slide the
key to the left. Follow the on-screen
instructions.
Step 6: Acquire Satellites
1. Go outdoors to an open area, out of
garages, and away from tall buildings.
2. Stop your vehicle, and turn on the
nüvi. Acquiring satellite signals can
take a few minutes.
The
bars indicate GPS satellite
strength. When at least one bar is green,
the nüvi has acquired satellite signals.
Now you can select a destination and
navigate to it. For more information
about GPS, go to
www.garmin.com/
aboutGPS.
nüvi 900 Series Owner's Manual
Power
Advertisement
Table of Contents
