Step 1: Mount Your Nüvi; Step 2: Configure Your Nüvi; Step 3: Acquire Satellites - Garmin nuvi 205 Series Quick Start Manual

Step 1: Mount Your nüvi
1. Plug the vehicle power cable into the back of your nüvi.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the suction cup
with a lint-free cloth. Remove the clear plastic from the
suction cup. Place the suction cup on the windshield.
4. Flip the lever back toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt your nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable into
a power outlet in your vehicle. Your unit should turn
on automatically if it is plugged in and the vehicle is
running.
8. If you are using a traffic receiver in Europe, connect the
external antenna to the traffic receiver and secure it to
the windshield using the suction cups. (Traffic receivers
are included in some nüvi 205 series packages.)
Step 2: Configure Your nüvi
To turn your nüvi on, slide the
instructions. To turn your nüvi off, slide the

Step 3: Acquire Satellites

1. Go outdoors to an open area, away from tall buildings and trees.
2. Turn on your nüvi.
nüvi 05 series quick start manual
Power key to the left. Follow the on-screen
Power
Suction cup mount Suction cup mount
Cradle Cradle
key to the left.
Vehicle power Vehicle power
cable cable