Reversing The Door Swing - AMERICANA 49-60658 Owner's Manual & Installation Instructions

Installation instructions
REVERSING THE DOOR SWING (CONT.)
i-_ REMOVE THE FRESH FOOD DOOR
3.1 Tape the door shut with masking tape.
3.2
[sing a 5/16"hex-head socket screwdriver and a
5/]6"open-end wrench, remove the two screws
holding the center hinge to the cabinet. Lift the
center hinge to free its pin from the socket in the top
of the door, and set hinge and screws aside. Be
careful not to lose the center hinge spacer and washer.
3.3 Remove d_e tape and flit d_e door away from d_e
cabinet. Lift the door from the pin in the bottom hinge
bracket. {If the plastic washer sticks to the door bottom,
put it ba& on the hinge.)
3.4 Set the door outskle-up on a non-scratching surface.
_-l REMOVE THE FRESH FOOD DOOR (CONT.}
3.5 Transfer the two screws from the opposite skle of the
cabinet to the screw holes vacated by the center hinge
renloval.
3.6 Transfer the washer (if your model has one) to the
opposite side.
J
3.7 Take one of the screws removed in step 2 and start
it in the outermost screw hole on the opposite side. Do not
ckive it all die way down leave enough space trader file
screw head fior thicl,_]essof the bracket.
IJ
REVERSING THE HARDWARE
4.1 Move the bottom hinge bracket and plastic washer fi'om the
right side to the left side.
Washer
Switchthe hingepin to the ¢---
oppositesideof the bracl<et _ ; ¢_.i- _, "-- -_
Bracket
12