Sensor Bar - Nintendo Wii Operation Manual

Syste m Setup
Connecting the AV Cable
1. Insert the AV Multi Out plug on the Wii AV Cable into the
AV Multi Out connector on the back of the console.
2. Insert the RCA plugs on the Wii AV Cable into the input
connectors on the TV, VCR or other audio equipment.
IMPORANT: The Wii console will not work with any AV cable other than
the model supplied with your Wii system or the component video cable
listed below.
NOTE: For higher quality video, the Wii component video cable
(Model No. RVL–011) can be ordered through Nintendo's web site at
support.nintendo.com (USA/Canada only) or by calling Customer Service
at 1-800-255-3700. Before ordering, check to make sure your TV has
component video inputs.
10
TV Inputs
AUDIO L AUDIO R
VIDEO
Wii Console
CAUTION - TV Screen Damage
Some televisions can be damaged by the display of a stationary image, because the image
may be permanently "burned" into the screen. Playing video games with stationary images
or patterns, or leaving video games on hold or pause, may lead to this type of damage. When
taking a break, place the game on pause and turn the TV off until you are ready to play again.
Before using your Wii system with any TV, especially front and rear projection or
plasma models, be sure to review all documentation included with your TV to find
out whether video games can be played on the TV without damaging it.
If in doubt, contact the manufacturer of the TV. Neither Nintendo nor any of Nintendo's
licensees will be liable for any damage to your TV.
Sensor Bar Setup
Connecting the Sensor Bar
Insert the Sensor Bar plug into the Sensor Bar
connector on the back of the console.
Placing the Sensor Bar
The Sensor Bar can be placed either above or below the TV screen.
• See page 12 for instructions on mounting the Sensor Bar to the top of the TV.
• See page 13 for instructions on mounting the Sensor Bar below the TV screen.
Sensor Bar mounted
above the screen.
Sensor Bar mounted
below the screen.
11