Page 3
To avoid electric shock when you use this system: Laser Type: Semiconductor laser Laser wave length: 662nm (typ.)(647nm~687nm) • Do not use the Wii during a lightning storm. There may be a risk of electric shock Laser power: Max. 0.9mW Numeric aperture: 0.6 from lightning.
Page 4
Battery Cover For access to CR Coin Lithium battery (CR2032). Perchlorate Material – special handling may apply. More information can be found at http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm. Do not remove battery cover unless instructed to do so by a Nintendo Customer Service representative.
Allows connection of external To avoid this from occurring, do not move the Control Stick when: NOTE: If the Control Stick is moved out of neutral position when the Wii power is turned ON, or when accessories such as the Nunchuk.
• After you have finished playing, be sure to remove the Game Disc from the console. • Do not store the Wii console in a humid place, on the floor, or in any location Wii AV Cable where it may collect dirt, dust, lint, etc.
Sensor Bar Setup Connecting the Sensor Bar TV Inputs 1. Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console. Insert the Sensor Bar plug into the Sensor Bar...
Page 8
Syste m Setup Mounting the Sensor Bar Above the Screen Mounting the Sensor Bar Below the Screen 1. Remove the protective film from the foam pads 2. Mount the Sensor Bar to the top of the TV. 1. Remove the protective film from the foam pads 2.
• A button on the front of the TV or VCR. section of the Operations Manual - Channels and Settings, for more information 1. Insert the DC plug on the Wii AC Adapter cord into the DC input connector on the • A button on the remote control.
• It may be necessary to remove the Wii Remote jacket – for example, to WARNING - Battery Leakage replace the batteries in the Wii Remote Plus. If you do remove the Wii Remote jacket, be sure to replace it before further play.
Page 11
Please use the wrist strap to prevent losing your grip on the remote and causing 2. Press and release the SYNC. button on the back of the Wii Remote Plus. The Player damage to the remote or surrounding objects, or injury to other people.
NOTE: Nintendo GameCube™ Game Discs are not compatible Wii Menu screen and press the A Button to make a selection. the battery life of the all remotes until the power of the Wii console is turned off. When the power is turned MORE Battery Life LESS with this model of the Wii system.
Page 13
Recommended distance: 3’– 10’ The remote can be used by itself, or in different configurations when connected up to other Wii accessories. These configurations can be used right or left handed. (from Sensor Bar to Wii Remote Plus) Wii Remote Plus –...
Page 14
Point the remote at a specific place on Wave the remote back and forth from Wii gameplay with the Wii Remote Plus and Nunchuk can involve rapid or vigorous motion. Please use the wrist strap to prevent losing your grip on the remote the TV screen.
Page 15
SD card accepts only SD or SDHC cards (32 GB maximum), If purchasing a new SD card, a list of cards that have been tested to work with the Wii console can including miniSD or SDHC and microSD or SDHC be found in the Wii - Systems and Accessories section of http://support.nintendo.com...
• The sound in some games doesn’t begin until the game begins. Wii Remote Plus or controller accessory buttons stick • Check that the Game Disc will work on your version of the Wii. This system will only heat. • If you have a mono TV or VCR and have left one of the audio cables unconnected 5.
Page 17
2. Moving Wii MotionPlus from a cold environment into a warm environment. Nintendo warrants to the original purchaser that the product (games and accessories) shall be free from defects in material and workmanship for a period of three (3) months from the date of purchase. If a interference that may cause undesired operation.