Pioneer DVD-V7400 Service Manual page 62

DVD-V7400, DVD-V7300D
COMMAND
Name Mnemonic
Input Number Request
Error Code Request
Input Unit Request
Input Barcode Data Request
Register A Request
Register B Request
Register D Request*1
Menu Call*2
Numeric Button*2
Button Select*2
Command Mnemonic
Each command is expressed as two (2) ASCII characters. There is no distinction between uppercase and lowercase letters except when the
Character strings are in a PR command.
NOTE: Do not issue a command without a Text File Data Upload [UU], Reject [RJ] or Open [OP] sequence while the video text is displayed.
A command issued without one of these sequences causes the player to return an error code E04.
Argument
An argument is expressed in either ASCII characters or ten digits and consists of either an address or an integer. A Control Register uses an
integer value to set a specified value or condition.
If a command requires an argument, it is always placed before the command.
Example :
Minimum 000 ~ Maximum 300
Minimum 000 ~ Maximum 520703
NOTE: If a command requires an argument but one is not supplied, the player returns an error message.
An Address can be a title, a chapter, a track, an index number, a frame number, or a time code depending upon how the address flag is set.
The Address must not exceed ten characters and/or digits.
Address Type Media Type
Title Number DVD
Chapter Number DVD
Frame Number DVD/VCD
Time Code DVD
CD/VCD
Track Number CD/VCD
Index Number CD/VCD
Block Number CD/VCD
a
N N N minutes N N seconds are calculated into frame number.
a b c d e
b
N N N minutes N N seconds.
1 2 3 4 5
c
N N minutes N N seconds.
1 2 3 4
d
N N minutes N N seconds N
1 2 3 4
62
SUPPORTING FORMATS
LB comp.
DVD CD
DVD
?N X X X
?E X X X
#I X X X
#B X X X
$A X X X
$B X X X
$D X X X
arg MC X X
arg NB X X
arg CU X X
N1N2N3
(except MS command)
(Only MS command)
Format
N N
1 2
N N
1 2
N N N N N N N
1 2 3 4 5 6 7
b
N N N N N
1 2 3 4 5
c
N N N N
1 2 3 4
N N
1 2
N N
1 2
d
N N N N N N
1 2 3 4 5 6
N block.
5 6
COMMAND
VCD
Name
ENTER Button*2
X
Get Information*2
X
X
X
NOTE: Commands prefaced with an *1 are supported by firmware
X Version 2.00
NOTE: Commands prefaced with an *2 are supported by firmware
X
Version 2.20
X
NOTE: A command with an argument or address parameter is prefaced
by arg (argument) or ards (address). If the arg or ards is in
parentheses (
Range (Min – Max)
0 – 99
0 – 99
a
0 – 1079999
0 – 59959
0 – 9959
1 – 99
1 – 99
0 – 995974
SUPPORTING FORMATS
LB comp.
DVD
Mnemonic
DVD
(arg) ET X X
arg GI X X
), the parameter is optional.
CD VCD