DVD-V7400, DVD-V7300D
7.1.4 TROUBLE SHOOTING
• No Power ON
START
Power ON
Turn on the power again
after 2 - 3 minutes.
No
Is tray open ?
Yes
No
Do the video and
sound come on ?
Yes
OK
58
• Blow out fuse of the primary side
• Blow out micro-fuse on the POWER SUPPLY Assy. (Check the each voltage.)
(P211, R711)
• MODE controller IC (IC101) on the SUBB Assy is damaged.
• Blow out micro-fuse on the POWER SUPPLY Assy.
(R711)
• Check the connection between LOSB Assy and DVDM Assy.
(12P flexible cable)
• Check the +6V power supply voltage (above micro fuse).
Check the connection between JACB Assy and DVDM Assy.