Time Lapse - GoPro Hero3 User Manual

UsinG YoUr Hero3: caMera Modes
Photo Burst
In Photo Burst mode, your camera takes multiple photos in short time intervals—
3 photos/1 second.
To capture a Photo Burst series, verify the camera is in Photo Burst mode. If the
Photo Burst icon on your camera's LCD screen is not showing, press
repeatedly until it appears.
to take a Photo Burst series:
Press and release . The red status indicator Lights flash and the camera
beeps multiple times.
Pro Sometimes 30 photos/1 second is too fast. Try a slower
tiP: Burst setting to better match the action.
▶See Photo Burst for instructions on how to change the interval settings.
16
UsinG YoUr Hero3: caMera Modes

time LAPse

time Lapse mode captures a series of photos at 0.5, 1, 2, 5, 10, 30 or 60 second
intervals. When using the 0.5 seconds setting, an SD card with a Speed Class 10
Rating is required.
To capture a time Lapse series, verify the camera is in time Lapse mode. If the
Time Lapse icon is not showing on your camera's LCD screen, press
repeatedly until it appears.
to take time Lapse:
Press and release . The camera initiates countdown and the red status indicator
Lights flash each time a Photo is taken.
to stop time Lapse:
Press and release . The red status indicator Lights flash three times and the
camera emits three beeps to indicate that time Lapse has stopped.
▶See time LAPse for instructions on how to change the interval settings.
17