Important Warning Messages - GoPro Hero3 User Manual

batterY life
usinG the CAmerA WhiLe ChArGinG
You can charge the camera's battery while recording Video or taking Photos.
Simply plug the camera into a GoPro-specific auto, wall or phone charger to charge
the HERO3 camera while recording Video or Photos. It is best to use GoPro's 1AMP
(1000mAh) Wall or Auto Charger for maximum charging performance while the
camera is in use. Performance of non-GoPro chargers cannot be guaranteed.
remoVinG the BAtterY From the CAmerA
The HERO3 battery is designed to have a tight fit to maximize reliability in high-
vibration activities.
to remove the battery:
1. Remove the battery door by placing your thumb in the indentation in the
battery door (on the back of the camera) and sliding it to the left.
2. Allow the door to pop out. Grasp the battery pull-tab and remove from the camera.
44

iMPortant warninG MessaGes

miCrosD CArD messAGes
No card present. The camera requires a microSD, microSDHC or
no sD
microSDXC card to record Video or take Photos.
sD FuLL Card is full. Delete files or swap card.
sD error
Camera unable to access card.
FiLe rePAir iCon on the LCD
If you see the File repair icon on the LCD screen, your Video file
was corrupted during recording. Press any button and the camera
will repair the file.
temPerAture WArninG iCon on the LCD
The temperature Warning icon will appear on the LCD when the
camera has become too hot and needs to cool down. Simply let it sit
and cool before attempting to use it again. Your camera will not allow
itself to overheat —do not worry, no damage has occurred.
45