Beaming An Application; Receiving Beamed Information; Turning Off Beaming - Garmin iQue 3600a Operating Instructions Manual

Beaming Information: Beaming an Application

Beaming an Application

To beam an application:
1. Tap the Home icon
2. Tap the App menu and select Beam.
3. Tap the application you want to transfer and tap Beam.
NOTE: Some applications are copy-protected and cannot be beamed, as indicated by a lock icon.
4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving handheld.

Receiving Beamed Information

To receive beamed information:
1. Turn on your handheld.
2. Point the IR port directly at the IR port of the transmitting handheld to open the Beam Status dialog box.
3. Tap Yes to receive beamed information.
4. Wait for the Beam Status dialog box to indicate that the transfer is complete, and then tap OK to display the new
entry.
Incoming records are placed in the Unfiled category.

Turning Off Beaming

To turn beam receiving on or off:
1. Tap the Home icon
4. Tap the pick list in the upper right corner and select General.
5. In the General Preferences screen, tap the
Chapter 8 Beaming Information
. Then tap the Menu icon
. Then tap Prefs .
Beam Receive pick list, and then tap On or Off.
.
8.2