Using Menus And Menu Commands; Displaying Tips - Garmin iQue 3600a Operating Instructions Manual

Introduction: Using the Handheld Interface

Using Menus and Menu Commands

Menus on your handheld are easy to use and work the same way in all applications, although the menu commands in each
application may be different. Menu commands for each application are described in Chapters 4 and 5. For information on Edit
menu commands, see "Using the Edit Menu"
Most menu commands have an equivalent Graffiti
commands on computers. To use Graffiti 2 menu commands, menus must be closed.
To display a menu bar and choose a command, do one of the following:
• Open an application (such as the Date Book); then tap the Menu icon
• Tap the tab in the upper left corner of the screen. Then tap the desired command from the menu.
• In the text input area of your device's screen, drag a diagonal line from the lower left to upper right to display the
Command toolbar. The command bar displays for approximately 4 seconds.
Tap an icon that represents the command you want, or enter the shortcut for the command in the text input area below the
Command toolbar. For example, to choose Select All in the Edit menu, draw the Graffiti 2 command stroke in the text area to
display the Command toolbar and then draw the letter S. Note that if you wait more than three seconds to draw the shortcut
letter, you'll have to redraw the Graffiti 2 command stroke to redisplay the Command toolbar.

Displaying Tips

Many of the dialog boxes that appear on your handheld contain a Tips icon
you may have and provide shortcuts for using the dialog box or other useful information.
To display a tip:
1. Tap the Tips icon
2. When you are finished viewing the tip, tap Done.
Chapter 1 Introduction
in Chapter 5.
2 command stroke, which is similar to keyboard shortcuts used to execute
®
.
Tips Icon
. Select the desired command from the menu.
Command Toolbar
in the upper right corner. Tips anticipate questions
1.9