Selecting Conduits For A Modem Hotsync Operation; Performing A Hotsync Operation Via A Modem - Garmin iQue 3600a Operating Instructions Manual

HotSync Operations: Conducting a HotSync Operation Via a Modem
®

Selecting Conduits for a Modem HotSync Operation

You can define which files and applications on your handheld synchronize during a modem HotSync operation to
minimize the time required to synchronize data with a Palm™ Modem accessory. To define what synchronizes, use the
Conduit Setup dialog box.
Applications that do not have a database (such as games) do not synchronize—even if you select the item in the Conduit Setup
dialog box.
To define which files/applications on your device synchronize during a HotSync
1. Tap the Home icon. Then tap the HotSync icon.
2. Tap the Menu icon
3. Tap Options, and then tap Conduit Setup.
4. In the Conduit Setup dialog box, tap the check boxes to deselect the files and applications that you do not want to
synchronize during a modem HotSync operation. The default setting is to synchronize all files.
5. Tap OK.

Performing a HotSync Operation via a Modem

After you prepare your computer and your handheld, and select your Conduit Setup options, you are ready to perform a
modem HotSync operation.
To perform a modem HotSync operation:
1. Tap the Home icon. Then tap the HotSync icon.
2. Tap the Modem icon to dial the Palm™ Desktop modem and synchronize the applications.
3. Wait for the HotSync operation to complete.
Chapter 9 Using HotSync
.
Operations
®
operation:
®
9.10