Presser Feet; Speed Control Plug - Kenmore 16951 Owner's Manual

PR ESSER FEET
To change the various presser feet, raise
the presser bar to its highest position by
lifting the presser foot lever. Loosen the
presser foot thumb screw, choose the
proper foot, insert from the bottom.
Tighten the screw using the large screw
driver to make certain the foot is secure.
SPEED CONTROL PLUG
insert the foot control plug onto the
three prong connector as shown at the
left. Connect the cord plug into any
1 !0 "" 120 volt AC wall outlet.
7