Grounding Instructions - Kenmore One-speed automatic washers Owner's Manual And Installation Instructions

• Tominimize possible shock h azard, the
cord must beplugged into amating, 3
prong, ground4ype outlet, grounded in
accordance with local codes
a nd ordi-
nances, If a mating outlet is not avail-
able, it is the personal responsibility and
obligation of the customer to have the
properly grounded outlet installed by a
qualified electrician.
• If codes permit and a separate ground
wire is used, it is recommended that a
qualified electrician determine that the
ground path is adequate.
• Do not ground to a gas pipe,
• Check with a qualified electrician if you
are not sure the washer is properly
grounded,
• Do not have a fuse in the neutral or
ground circuit.
1. 3 prong grounding plug
2. 3 prong grounding-type outlet
3. Groundprong
4 Powersupp_ cord
GROUNDING
INSTRUCTIONS
For a grounded, cord-connected
washer:
This washer must be grounded, In the
event of a malfunction or breakdown,
grounding will reduce the risk of
electrical shock by providing a path of
least resistance for electric current. This
washer is equipped with a cord having
an equipment-grounding conductor and
a grounding plug, The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
WARNING:
Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service-
man if you are in doubt as to whether
the appliance is properly grounded.
Do not modify the plug provided with
the appliance - if it will not fit the outlet,
have a proper outlet installed by a
qualified electrician.
For a permanently connected
washer:
This washer must be connected to a
grounded metal, permanent wiring
system, or an equipment grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the appliance.