Assembly - Kenmore Liquid propane gas grill Assemble And Operation

No lank
Bracket
!
Left hand leg assembly
o
Tank
Bracket
Right hand leg assembly
Caster Plug
1. Turn leg assembly upside down as
shown and insert caster plug.
Make sure caster plug tab is in line with
notch in leg.
2. Turn leg assembly over and tap on a hard su,'face
until the caster plugs are fully seated.
Leg Assembly
(Left Hand shown)
Locking Caster
-4!
%. ),v"
"q._/•
Non-Locking Caster
3. Insert locking casters into the caster plugs on front of leg
assemblies and press in until caster is fully seated as shown,
Console mounting
tabs are on front
side of leg
assemblies.
J
4. Insert non-locking casters into the caster plugs
on rear of leg essembiles,