Entering Data; Marking A Waypoint - Garmin GPSMAP 76S Quick Start Manual

Quick Start

Entering Data

Symbol Field
Mark Waypoint Page
8
There will be many times that you may need to enter data. An example is
naming a waypoint. The ROCKER key is used to navigate through menu items
and to enter data.
Let' s combine a couple of lessons. We will create a new waypoint, enter a
waypoint name, and assign a symbol to the waypoint.
The term 'Waypoint' may be new to you. You will fi nd the term Waypoint is
used frequently when talking about navigation. A Waypoint is a position stored in
the unit' s memory. Waypoints are used for direct navigation or to build a Route.
Name Field
Creating or 'Marking' a waypoint with the GPSMAP 76S is easy. The unit has
to be turned on, and receiving at least three satellites (or simulating navigation)
to mark a waypoint.

Marking a waypoint:

1. Press and hold the ENTER/MARK key.
When the ENTER/MARK key is held down, the MARK function of the key
is activated and the GPSMAP 76S will capture it' s current position. The unit will
then display the Mark Waypoint Page. By default, the unit will assign a square as
the symbol and a number as the name and the 'OK' Button will be highlighted.
Pressing the ENTER key again would save the waypoint using the default name
and symbol, but let' s change them to something more meaningful.
Changing the symbol:
1. Using the ROCKER key, highlight the Symbol Field, then press ENTER.
2. Using the ROCKER key, highlight the 'Scenic Area' symbol, then press ENTER.