Navigating A Saved Track - Garmin GPSMAP 60CSx Owner's Manual

Navigating a Saved Track

You can save your track log to use later as a
TracBack. When initiated, a TracBack route takes you
back to the oldest stored track log point.
To use the TracBack feature:
1. With the Saved Tracks Page for the track or
the Track Log open, highlight the TracBack
button, and press ENTER to open the
TracBack Page. A map showing the entire
track appears and you are prompted to select
the point you want to TracBack to.
2. Use the ROCKER to move the pointer to the
point on the map, and press ENTER to start
navigating the TracBack.
3. Select either Follow Road to route back to
the selected point using available roadways,
or select Follow Track to retrace your original
path of travel. Highlight the Don't Ask Again
option, and press ENTER if you want to use
the same option each time you use TracBack.
The Map Page opens with directions to the
first turn on the track at the top of the page.
GPSMAP 60CSx Owner's Manual
4. Move in the direction
of the first turn. When
you reach the first turn,
directions to the next
turn are shown, and so
on, until you reach your
destination.
5. To exit, press MENU, and
select Stop Navigation.
To create a user waypoint
on a saved track:
1. With a saved track shown on the map, use the
ROCKER to move the pointer to the place on the
track that you want to mark as a user waypoint.
2. Press and hold the ENTER key to open the
Mark Waypoint Page.
3. Customize the user waypoint, highlight OK,
and press ENTER to save it.
4. To delete these track logs, highlight individual
logs, and then press ENTER. Use the Delete
All button to clear the entire list.
B O >
ASIC PERATION
31