Using Soft Keys; Using Data Entry/Shortcut Keys; Status Bar - Garmin GPSMAP 3006C, 3010C Owner's Manual

g s > u gPsMaP 3006c/3010c K
ettIng tarted sIng the

Using Soft Keys

Soft keys are located along the bottom of the display and are used as shortcuts to
select the most commonly used options for the selected page, window, or tab. To
select a soft key, press the key directly below it.

Using Data Entry/Shortcut Keys

Use the data entry keys to enter alphanumeric data
into the unit, such as a waypoint name. Use data
entry keys in conjunction with the ROCKER. Press
the key once to select the first letter on the key, twice
to select the second letter on the key, three times
to select the third letter on the key, or four times
to select the number on the key. When you have
selected the correct letter or number, pause, and
the unit advances the cursor to the next character
automatically.
Use the shortcut keys to jump to main pages,
or select menu and list options by pressing the corresponding number of the
selection. For numbers 1-9, press the number to choose the selection. For
numbers 10 and higher, press the first digit, then press the second digit within one
second.

eYPad
Soft keys

Status Bar

At the top of each page, the status bar provides current status information for
connected devices and several of the chartplotter functions. As additional devices
are added to the GPSMAP 3006/3010 or the Garmin Marine Network, an icon for
each device appears on the status bar.
Status bar
Alarm alerts also appear on the status bar. To acknowledge an alarm, press QUIt.
If an alarm condition persists, it appears on the status bar until the alarm condition
no longer exists. For more information about alarms, see pages 58-60.
GPSMAP 3006C/3010C Owner's Manual