Advanced Sub Tab - Garmin GPSMAP 3006C, 3010C Owner's Manual

u r > r t
sIng adar adar ab

Advanced Sub Tab

Use the Advanced sub tab to set AFC Mode, front of boat offset and antenna size.
NOtE: The Antenna Size field is available only if you are using a
GMR 404/406 Marine Radar.
The available Advanced sub tab settings are:
• AFC Mode—sets how the scanner frequency is adjusted. Select Auto
to automatically adjust the scanner frequency for optimal performance
(recommended). Select Manual to set the frequency manually.
To manually adjust the scanner frequency:
1. Highlight the AFC Mode field, and press ENTER.
2. Select Manual, and press ENTER.
3. Highlight the Freq button to the right of the AFC Mode field, and press
ENTER.
NOtE: The Freq button is available only available if Manual is selected in
the AFC Mode field.
100
4. Press up or down on the ROCKER to adjust the scanner frequency.
5. Press ENTER to accept the frequency change.
NOtE: The Signal Strength bar graph is damped and may be slow when
responding to frequency tuning changes.
• Signal Strength—shows the strength of the radar signal
• Front of Boat Offset—allows you to offset the front of the boat if you
mount the radar at an angle.
• Antenna Size—allows you to select the size of your antenna (4 Foot or
6 Foot).
NOtE: This field is available only if you are using a GMR 404/406 Radar.
Select 4 Foot for a GMR 404 Radar; select 6 Foot for a GMR 406 Radar.
GPSMAP 3006C/3010C Owner's Manual