Midi Capabilities; Cyber Foot Controller™ Midi Device - Fender Cyber-Deluxe DSP 7 Operating Instructions Manual

% A receive channel, 1–16 or Omni, must
be selected to receive
messages.
% The Cyber–Deluxe™ amplifier does not
recognize or transmit System Common
messages.
% A transmit channel, 1–16, must be
selected to transmit
messages.
TAP TEMP0 EFFECTS
DOWN UP
/ TUNER ON
F O O T C O N T R O L L E R
% Fender® Cyber Foot Controller™
MIDI device, (P/N 022-9100-000)
w w w w w w . . f f e e n n d d e

MIDI Capabilities

All MIDI features are accessible in the Utility menu and are global to the
amplifier operating system (independent of the presets).
Any changes made to the MIDI or system configuration are preserved when
power is removed.
performing a "Factory Presets Restore" procedure (covered on page 29),
but be aware that this also restores all presets to factory settings.
The Cyber-Deluxe™ amplifier supports the MIDI interface standard using
the MIDI IN and MIDI OUT jacks on the rear panel, both 5-pin DIN jacks.
The amplifier uses Channel messages and System Exclusive (SysEx)
messages to accomplish the following tasks:
Receives Channel Messages for:
• Program changes (presets "00." through "63").
channel
• Program change activating the Cyber-Deluxe™ amplifier's Tuner remotely.
• Control changes sent from Continuous Controllers (and similar MIDI
devices) to control parameters.
• Control changes remotely setting the "tap" value.
• Control changes to enable/disable effects.
• Control changes that have been made to another Cyber-Deluxe™
amplifier that is transmitting on the MIDI network.
Receives SysEx Messages to:
• Download Utility and preset data from other sources (PCs or another
Cyber-Deluxe™ amplifier) using "MIDI Dump."
• Edit individual Cyber-Deluxe™ amplifier parameters/settings.
Transmits Channel Messages for:
• Program changes (presets "00." through "63").
channel
• Control changes that have been made to the amplifier by direct control
changes (front panel) or by external control devices such as MIDI CC or
expression pedals.
Transmits SysEx Messages to:
• Upload Utility and preset data to other devices (PCs or another Cyber-
Deluxe™ amplifier) using "MIDI Dump."
NOTE: When the Continuous Controller Echo feature is enabled, all
incoming Continuous Controller control change messages will be
retransmitted out of the MIDI Out connection (in addition to messages
originated in the amplifier). When disabled, only messages originated by
the amplifier are transmitted.
The FENDER
The Fender ®
Cyber-Series™ amplifiers, provides standard MIDI capability for all MIDI
equipped amplifiers.
Effects On/Off switch, a dual mode TAP/TUNER switch, a dedicated Volume
pedal, and a general-purpose Continuous Controller expression pedal. The
Effects On/Off switch on the Cyber Foot Controller™ MIDI device will
enable/disable the MOD. F/X and DELAY effects groups on the
Cyber–Deluxe™ amplifier, without affecting the REVERB group.
NOTE: The dual mode Tap/Tuner and Effects On/Off functions may not be
supported by foot controllers made by other manufacturers.
✧
e r r . . c c o o m m
Default system configuration may be restored by
® Cyber Foot Controller™ MIDI device
Cyber Foot Controller™ MIDI device, designed specifically for
It provides hands-free selectability of presets, an
w w w w w w . . m m r r g
Advanced Functions
g e e a a r r h h e e a a d
27
d . . n n e e t t