Troubleshooter’s Checklist; Stage 112Se Specifications - Fender Stage 112SE Owner's Manual

TROUBLESHOOTER'S CHECKLIST
- Is the power cord properly plugged into an electrical outlet?
- Is there power at the outlet?
- Is the speaker properly connected to the amplifier?
- Are all the control knobs turned above four?
- Is the volume control on the instrument turned up?
- Is your instrument properly plugged into the amplifier?
(Eliminate all effects and try another guitar cord.)
If, after checking all of the above, the system is still not
working correctly, consult your Fender Service Dealer.

STAGE 112SE SPECIFICATIONS:

TYPE:
PART NUMBER:
DIMENSIONS:
POWER OUTPUT:
INPUT IMPEDANCE:
EFFECTS LOOP:
LINE OUTPUT:
POWER REQUIREMENT:
SPEAKER:
SOUND:
PR 203
120V Version:
230V Version:
Height:
width:
Depth:
Weight:
160 Watts R.M.S. into 4 ohms at 5% T.H.D.
Input 1:
Input 2:
Preamp Output Impedance:
Power Amp Input Impedance:
Power Amp Sensitivity:
-3 dBV into 600 ohms (minimum).
100 - 120VAC, 50-60 Hz, 4A max
230 - 240VAC, 50 Hz, 1.8A max
Fender Special Design 12", 8 ohm ( P/N 026488 )
TraSH
Classic to
... and all points in between!
22-6700
22-6730
1811 ( 45.0 cm )
22-1/2" ( 57.2 cm )
10.5" ( 26.7 cm )
46 Lbs. ( 20.7 kg. )
850k ohms
66k ohms
1k ohms
10k ohms
1.4V for clipping