CONFIDENTIAL This information and any copies produced elec- and PROPRIETARY and is the property of Fender® tronically or otherwise must be surrendered upon Musical Instruments Corporation. It is not to be...
BULLET® 15 DSP (This is the model name for warranty claims) SPECIFICATIONS Model Name: Bullet 15 DSP Release Number: PR 241 (Not a model number) Part Numbers (120V, 60Hz) US: 2267700020 (110V, 60Hz) TW: 2267701020 (240V, 50Hz) AUS: 2267703020 (230V, 50Hz) UK:...
(This is the model name for warranty claims) SERVICE NOTES 1. CHASSIS REMOVAL is accomplished by first 3. BULLET 15 DSP MAIN PCB REMOVAL is ac- removing four (4) screws from the Rear Cabi- complished by removing the following items: All...
Diodes D7 and D8 are This overview is focused for the efficient use and used for common-mode protection of the amplifier. security of Fender® proprietary information. Current feedback is achieved by sampling current at the negative speaker terminal and feeding the...
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department. ** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part. ** Both a unique Fender® part and a Safety Requirement part as defined above.
Page 7
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department. ** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part. ** Both a unique Fender® part and a Safety Requirement part as defined above.
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department. ** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part. ** Both a unique Fender® part and a Safety Requirement part as defined above.
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department. ** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part. ** Both a unique Fender® part and a Safety Requirement part as defined above.
(This is the model name for warranty claims) Schematics and Drawings Service Diagram (Schematic) ....Bullet 15 DSP Service Diagram (PCB Assy) ....Bullet 15 DSP Service Diagram (Schematic) ....Micro DSP Service Diagram (PCB Assy) ....Micro DSP Chassis Assy ....Bullet 15 DSP...